Although this may be corrected with a heatsink, ICs should never be subjected to direct high power loads without appropriate buffer stages. Power dissipation: 400 milliwatt: It is the amount of heat dissipation that the IC can withstand, and the limit at which its junction temperature could rise to 150 degree Celsius. Junction temperature: 150 degree Celsius: It is the temperature that should not be exceeded at any cost on the IC, otherwise that mat cause a permanent damage to the IC Input common mode voltage range: -0.3 to 32 VDC: These are the maximum and the minimum common mode input signal levels that may appear across the inputs of the opamp. Input differential voltage range: +/- 32 VDC: This range refers to the voltage difference that could be applied across the input pinouts of each of the opamps.

If your power supply is single supply 32VDC.

Supply voltage: If your supply is dual supply (absolute) maximum is +/- 16V. Absolute Maximum ratings and operating conditions:Ībsolute maximum ratings are at-most limit of the component beyond which the component will not work as described / get damaged permanently. Pin #14 is the output for fourth amplifier.

Pin #13 and #12 are inputs for fourth amplifier (top left).Pin #9 and #10 are two inputs for third amplifier.Pin #8 is output for third amplifier (right top).Pin #7 is the output for second amplifier.

Pin #5 and #6 are the input for second amplifier (right bottom).

Pin #4 is Vcc who’s maximum input voltage is 30V / +/-15V.

Pin #2 and #3 are the input for the first amplifier.

Pin #1 is the output for first amplifier (left bottom).

There are 4 individual amplifiers / op-amps.

Lm324 pinout download free